CEMENT PRIMER

VICTORIA GOLD CEMENT PRIMER

Victoria Gold Water Based Cement Primer is a water based primer, suitable for use on plastered, masonry, POP Puttied limed or pre-painted wall surfaces.

PRODUCT FEATURES AND BENEFITS
  • Victoria Gold Water Based Cement Primer is specially formulated to provide excellent inter-coat adhesion and chalking resistance.
  • It provides superior Whiteness opacity and smoothness and enhances the overall appearance and coverage of topcoat.
  • tis a fast drying primer with high coverage and superior ease of application.
  • Bonds powdery, dry and friable surfaces, including limewash and distemper.
  • Victoria Gold Water Based Cement Primer is alow odor primer.
PRODUCT RELATED INFORMATION
Film Composition:

Pigment : Non-Lead/Chrome pigment

Binder : Acrylic Copolymer Emulsion

Solvent : Water

Colour Range:

White only

Gloss / Sheen Levels :

NA, used as undercoat

Stability of Thinned Paint:

Can be used within 24 hours of thinning after mixing

Dry Film Thickness (Calculated):

15-20 micron at a coverage of 200-250 sqft/ltr and applied on an average porosity surface

Theoretical Coverage:

The spreading capacity of this product varies considerably according to the nature of surface. Such as its roughness and porosity Coverage of 200 - 250 sqft/ltr is achieved for one coat application, when diluted with 500ml of water for 1liter of primer, and when applied on a smooth surface of average porosity.

Pack Size:

Available in 10 and 20 litres.

APPLICATION RELATED INFORMATION

Before application read the safety, health and environmental information and the precautions given below.

Application Tool: Suitable for application by brush or roller.
Surface preparation: Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes, wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
New concrete/plaster surface should be allowed to mature properly.
Ensure that surface is clean dry free from all loose particles, dust, grease, wax mould fungal growth etc. before application.
Allsurfaces should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off.
Suitable remedial measures should be taken in case of water seepage/leakage problems.
Fungus affected areas need separate treatment.
Thinning: 500ml of water for 1 litre of primer for brushing consistency.
Priming: Prime surface with a coat of Victoria Gold water Based Cement Primer and allow it to dry overnight. Use Acrylic wall Putty to rectify cracks/ dents and smoothen out the surface. Allow drying for 4-6 hours. Apply a second coat of Acrylic Wall Putty and allow it to dry for 4-6 hours. Send the surface with Emery Paper 180 to smoothen the putty surface. Wipe off loose particles. Apply another coat of primer onthe puttied surface. Allow drying for 4-6 hours Sand the surface with Emery Paper 380 and wipe clean. Primer Putty Primer is a must to get the desired effect of topcoat.
Drying Time:
Touch Dry : 30 Minutes
Recoat : 4hours
Drying time may vary according to the temperature and humidity. For instance drying time will be significantly longer in cool and damp conditions.
SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION
  • Store container in an upright position with Lid tightly closedinacooland dry place.
  • Keep out of reach of children, food drink and animal feeding stuffs.
  • if swallowed seek medical advice immediately and show this container or label.
  • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
  • Avoid Contact with skin or eyes, wear suitable gloves. May cause sensitization by skin contact.
  • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
  • After contact with skin was immediately with soap water or a propnetary skin cleanser. Do not use solvent thinners or White spirits.
  • Do not pour leftover paint down the drains or in watercourses.
  • Containspillage using sand or earth.
  • Safety Data Sheet available for professional user on request.
  • No added lead, mercury or Chromium compounds.
PRECUATION * Avoid extreme temperature. * Donotapllyon damp surface. * Mix well before use. * Wear eye protection while applying. * Avoid inhalation of dust by wearing a suitable nose pad during sanding or surface preperation. * In case of ingestion seek medical attention.